ECUTEST Dual Mode Analyzer Specifications

POWER

  • Voltages:  World wide AC input capabilities.
    100/120/220/230/240 VAC, 50/60 Hz.  Meets domestic and foreign safety standards
  • Current: 3.0 Amperes @ 120 volts, 1.5A @ 240 volts.
  • Fuse: Universal fuse holder, standard 1 ¼ inch fuse, 3 Amp AGC 250V.
  • Power Switch: DPDT On/Off.
  • Power Receptacle: Universal recessed 3 wire power receptacle. Rating, 10A, 250VAC UL, CSA, VDE approved.
  • Voltage Selector: Four (4) positions 100/120/220/240.

WEIGHT

  • Net: 10.2 kg (22.5 lbs)
  • Shipping: 23.13 kg (51 lbs)

SIZE

  • 9.5 Width, 11.5 Height, 17 Depth
  • Vinyl Carry Handle
  • Tilt Stand

ENVIRONMENTAL

  • Temperature:    Operating 0°C to + 55°C
                                Storage -40°C to + 75°C
  • Humidity:           Operating 93%RH, 40°C
                                (non-condensing)
  • Altitude: Operating 16,000 Ft. above sea level

DISPLAY

  • Type: Electroluminescent Display, 560 x 400 pixels. Pixel aspect ration 1:1. 100 pixels per inch. Frame rate 72.81 Hz.
  • Electromagnetic Compatibility: Complies with FCC Docket, Part 15, Subpart J, Class B; and FTZ 1046/84; VDE 0871, level B.
  • Viewing Angle: Greater than 160° viewing cone.

DISPLAY (continued)

  • Display Color: Peak wavelength (type) 585 nm, Yellow-Orange.
  • Pixel Luminance: On luminance at 60 Hz frame rate. Typ. 46fl (158) Min 31 fl (106cd/m2). Luminance measured at center of display screen, full on pattern, 25°C ambient.
  • Fill Factor: 49%, luminance area/total active area.
  • Filter: Gray Circular-polarized Acrylic with hard coat.

FUNCTIONS

  • Differential/Absolute Mode
  • Preprogrammed Calibration Programs: Automatically sets - frequency, gain, phase, scale, for differential and absolute modes.
  • Auto-Center Function selective for each mode.
  • Phase rotation 0° to 360°, manual or auto increment, decrement.
  • Programmable gain: 255 steps in 1 step increments.
  • Programmable screen clear 0 to 16 seconds in 1 second steps.
  • Instantaneous screen clear within 14 thousandth of a second.
  • Screen Freeze, holds last flaw defect for detail signal analysis.
  • Strip chart analog outputs, for hard copy.
  • Phase angles and grid displayed continuously.
  • 10 bit, simultaneous sampling, ADC insures accurate signal definition.
  • Remote Box Controller. Controls auto balance, screen freeze, differential and absolute mode switching, clears screen.
  • Flex Switch Keyboard. Over 5 million operations, 4-8 oz. typical operating force.
  • Eight Character Alphanumeric Red LED display. Displays commands and current status.
  • Nine scale positions.
  • Auto-balance differential and absolute, detects defective probes, holds balance indefinitely.

OPTION

  • Foot Switch:  Allows erase and mode switching.

1 Year Warranty

Back